Product Specifications
32 digital I/O lines for non-locked monitoring or control of high channel-count applications.
Interrupt on bit change detection for monitoring critical signals.
Two versions:
DT335 — All signals are brought out
to a dedicated 68-pin connector.
DT335-50 — All signals are brought
out to a dedicated 50-pin connector.
Supported by Measure FoundryTM, test and measurement application builder
software that lets you easily create complex measurement applications.
Manufactured by Data Translation, Inc. Refurbished in good condition.
The low-cost digital I/O boards for the PCI Bus are ideal for applications requiring control capabilities, the DT335 and DT335-50 both include 32 digital I/O lines. 32 Digital I/O Channels for High Channel-Count Requirements : Both boards provide 32 digital I/O lines,grouped into four 8-bit ports. You can program each port for either input or output. Digital outputs are capable of driving external solid-state relays (sink 24 mA and source 15 mA). The DT335 and DT335-50 boards can generate an interrupt when any of the eight digital I/O lines corresponding to one of the 8-bit digital ports changes state. This feature is useful when you want to monitor critical signals or when you want to signal the host computer to transfer data to or from the board. You can enable the interrupts on a bit-by-bit basis on this port. Easy User Connections - DT335: All signals are brought out to a dedicated 68-pin connector on the backplate of the DT335 board. The STP68 screw terminal panel is available to simplify connections. The EP305 cable connects the board to the STP62 screw terminal panel.
SKU#1D
Qty 1
Alternative P/N #: DT335, DT335-50, DT335 50, 19770, 19771
Product Manual
Product Images
