Product Specifications
Status LEDs Eight LEDs:
Board Fail (FAIL), CPU Status (STAT), CPU Activity (RUN), System Controller (SCON), LAN Activity (LAN), LAN Power (+12V), SCSI Activity (SCSI), VME Activity (VME)Timers:
Four 32-bit tick timers and watchdog timer in Petra ASIC Two 32-bit tick timers and watchdog timer in VMEchip2 ASIC
Interrupts- Eight software interrupts (including those in the VMEchip2 ASIC)VME I/O VMEbus P2 connector
Serial I/O Four EIA-232-D DTE configurable serial ports via VMEbus P2 connector and transition module
Parallel I/O Centronics-compatible bidirectional parallel port via VMEbus P2 connector and transition module
Ethernet I/O Ethernet transceiver interface via DB15 connector on transition module
SCSI I/O SCSI interface with DMA via LCP2 adapter board VMEbus interface
VMEbus system controller functions
VMEbus-to-local-bus interface (A24/A32, D8/D16/D32/block transfer [D8/D16/D32/D64])Local-bus-to-VMEbus interface (A16/A24/A32, D8/D16/D32) dVMEbus interrupter
VMEbus interrupt handler
Global Control/Status Register (GCSR) for interprocessor communications
DMA for fast local memory/VMEbus transfers (A16/A24/A32, D16/D32/D64)
Manufacturer by Motorola. Product is refurbished in good condition.
MVME167P is a single-board computer ; characteristics 33MHz, 16MB, and SDRAM. Microprocessor 25MHz, form factor 6U VMEbus, Memory 16/32/64MB synchronous DRAM (SDRAM), configurable to emulate 4/8/16/32/64MB ECC-protected DRAM, EPROM Four 44-pin JEDEC standard PLCC EPROM sockets with 256Kb x 16 density, Real-time clock 8KB NVRAM with RTC, battery backup, and watchdog function (SGSThomson M48T58), and RESET and ABORT switches on front panel. The MVME167P draws power from VMEbus backplane connectors P1 and P2. P2 is also used for the upper 16 bits of data in 32-bit transfers, and for the upper 8 address lines in extended addressing mode. The MVME167P may not operate properly without its main board connected to VMEbus backplane connectors P1 and P2. Whether the MVME167P operates as a VMEbus master or VMEbus slave, it is configured for 32 bits of address and 32 bits of data (A32/D32). However, it handles A16 or A24 devices in the address ranges indicated in the VMEchip2 chapter of the Programmer’s Reference Guide. D8 and/or D16 devices in the system must be handled by the MC68040 software
SKUE1
Qty 2
Alternative P/N: MVME167PA-34SE, MVME 167PA-34SE, MVME 167PA 34SE
Product Manual
Product Images
